1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Other Subject - FAQs

FAQs

  1. Toxic
    When I establish tunnel with Linksys VP41, I set username as pretty.com in VP41. But I still can't establish tunnel with RV082?
    How can I establish Client to Gateway tunnel via WinXP/Win2K with RV082?
    When I try to save the VPN configuration into RV082, there will be a warning says that "This tunnel conflict with XXX" ?
    How many tunnels can go into RV082 at the same time?
    What is the bandwidth if I use 3DES/SHA as my IPSec SA?


    When I establish tunnel with Linksys VP41, I set username as pretty.com in VP41. But I still can't establish tunnel with RV082?
    When you set username in Linksys VP41, the value must be the same with the value you set USER_FQDN in RV082. But the USER_FQDN (Known as Email type) string must contain "@", so you have to change the username as who@pretty.com and set this value in RV082 as well.

    How can I establish Client to Gateway tunnel via WinXP/Win2K with RV082?
    Please refer to the sample configuration. Especially remember that RV082 is "PFS Enable" as default value but WINXP/WIN2k is not. Many users have encountered this problem.

    When I try to save the VPN configuration into RV082, there will be a warning says that "This tunnel conflict with XXX" ?
    RV082 is able to detect the value you enter is valid or not. Once the value you try to save into will conflict with other tunnel, you will get the warning message and stop going further. Please reenter the wrong (confliction) value to solve this problem.

    How many tunnels can go into RV082 at the same time?
    You are allowed to establish 50 VPN tunnels and 2 Group VPN tunnels. But this does not mean that only 52 tunnels can go into RV082 at the same time. When one of them has been configured as %any, that tunnel can accept incoming VPN packets from different gateway IP as many as possible until the system loading high enough to stop user to go into system any more. As I know, this system can handle at least 100 at the same time.

    What is the bandwidth if I use 3DES/SHA as my IPSec SA?
    I have tested it with 2 RV082 in back 2 back situations. Because it uses CPU to do the Encryption/Decryption, the bandwidth can run high up to 70 Mbits/sec.