1 WAN, 2 LAN's ?

Discussion in 'Tomato Firmware' started by likudio, Dec 7, 2009.

  1. likudio

    likudio Addicted to LI Member

    Hello.
    I would like to know if with Tomato Firmware (or any other WRT54GL firmware) I can create 2 internal LAN networks, one in ROUTER mode, and one in GATEWAY mode. If it's posible, I really need to know how, because I don't want to buy a new router. Thank you.
     
  2. michse

    michse Addicted to LI Member

    Hi, yes this should be go.

    I think a mix of vlan tuning and modem connection...

    init script

    Code:
    sleep 5
    ifconfig vlan2 192.168.3.1 netmask 255.255.255.0
    ifconfig vlan2 up
    ip addr add 192.168.1.3/24 dev vlan1 brd +
    gives your lan a second network and your wan a second ip.

    in firewallscript
    Code:
    iptables -I POSTROUTING -t nat -o vlan1 -d 192.168.1.0/24 -j MASQUERADE
    lets traffic pass to 192.168.1.0 net on wan

    Code:
    nvram set manual_boot_nv=1
    nvram set vlan0ports="5* 3 2 1"
    vlan2hwname=et0
    vlan2ports="5* 0"
    nvram commit
    separates port 0 to vlan2. so you have 2 lans and one wan in gateway and one in router mode. some firewallrules may be nessessary.

    michse
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice