1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1 WRT54G v4 / 1 WRT54GL v1.1

Discussion in 'Tomato Firmware' started by worm9110, Jun 4, 2008.

  1. worm9110

    worm9110 Network Guru Member

    I have many wireless devices that currently connect to my WRT54G, 8 total. It's currently located downstairs in my house. My gaming computer connects wirelessly to it from upstairs, using G. I've noticed that my transfer speed and signal have degraded over the years because of more activity from other wireless devices around my neighborhood and I've added a few wireless devices of my own over the years. With all this activity my gaming computer sometimes lags when playing games now. I want to accomplish the following.

    Router 1, WRT54G
    Currently connects directly to Comcast cable modem
    Uses B/G
    Allow many wireless devices, B/G to connect to it

    Router 2, WRT54GL
    I want to connect via wired to WRT54G
    Only use G
    Use gaming computer to connect to this router only using G only

    What type of solution would I use?
     
  2. worm9110

    worm9110 Network Guru Member

    Anyone?
     
  3. HennieM

    HennieM Network Guru Member

    modem
    |
    Wired
    |
    WAN
    WRT54G (SSID "One", channel 6, B/G, IP 192.168.1.1/255.255.255.0, DHCP server on)
    LAN
    |
    Wired
    |
    LAN
    WRT54GL (SSID "Two", channel 1, G-only, IP 192.168.1.2/255.255.255.0, DHCP server off)
     

Share This Page