Hello everyone. This is my first post on this forum, so i'll explain as good as possible. Since our limited budget at work, we wanted to get to work a wireless bridge with two linksys WMP54G on a Linux Debian Etch BOX. We configure the cards with ndiswrapper and de windows XP .inf, and work like a charm!! We connect the two boxes in ad-hoc and the speed is more than acceptable, 54-36Mb/s bit rate. Ok, but when we get the bridge to work, linking with brctl the wlan0 and eth0 interfaces, and make traffic go trough the two boxes wireless bridge, the bit rate goes down instantly at 1Mb/s allways!!!! Anybody has this problem? Or may give me some tips to get this to work at acceptable speed whithout changing the cards? because i can't!!