1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2 AP's Questions

Discussion in 'DD-WRT Firmware' started by alinford, Dec 13, 2007.

  1. alinford

    alinford LI Guru Member

    (I posted this under networking first, but it seems like it makes more sense here)

    I have 2 WRT54GL's running dd-wrt. AP1 is running DHCP, is connected to the modem and then to the wired network.

    I will add AP2 to the network via a wired connection. I want to use the same SSID so that clients can hop from AP1 to AP2 depending on signal strength. This would give me better wireless coverage.

    The 2nd AP will have DHCP turned off, and the same SSID, but I am a bit lost after that.

    I want to reserve the IP in DHCP for the AP2.

    How should each of the WRT54GL's be setup?
    Should they both be on the same channel, or different channel's?
  2. cgondo

    cgondo Network Guru Member

    They should be set up with different channels but the same SSID.

Share This Page