1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2 hard drives on 1 usb port

Discussion in 'Cisco/Linksys Network Storage Devices' started by twistedsam, Mar 8, 2007.

  1. twistedsam

    twistedsam LI Guru Member


    I recently bought the SNLU2, and a twin external hardrive console from sharkoon.
    I installed 2 hardrives in the console, 1 - 400GB & 1 -120GB
    So the console is connected with 1 usb cable to the SNLU2.
    It had the firmware : NSLU2_V23R72
    All was good, both hardrives are detected and formated with SNLU2.

    Now i did a firmware update, installed this one : Unslung 6.8 Beta.

    Firmware update went all good.
    Now only 1 hardrive is recognized, the 400GB (master)

    if i disable the 400GB and restart the SNLU2 it recognize the 120GB (slave)

    I reconnect both hd's, and only the master 400GB is recognized, there is nothing to see from the 120GB hardrive.

    I also try to conect to the port 1 or port 2, both same problem.
    What can i do to get my both hd's to be recognized. ?

    Thx, Sammy

Share This Page