1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2 x Linksys WAP54G in the same network

Discussion in 'Other Linksys Equipment' started by maxblast, Mar 7, 2009.

  1. maxblast

    maxblast Guest

    What would be the best way to use 2 Linksys WAP54G in my network?
    I just want to have WiFi in my house on every floor for my Iphone and our laptop.
    I have managed to get one WAP54G up and running but how do I setup a second one to do the same?
  2. joeinbend

    joeinbend Guest

    I know this is an old thread, but hey why not? :) I have two WAP54G's in my house, and you can set them up so any wi-fi device will seamlessly roam between them. All you have to do is set them up with the same SSID, and (in my experience) on the same channel. Then, if you walk between them, it will automatically roam.

    You do not have to tell the WAP's to do anything special. The "roaming" logic happens with the actual wi-fi device itself, not the access points.
  3. Toxic

    Toxic Administrator Staff Member

    keep them in the same SSID but use a different channel.

Share This Page