25 have looked but no help. Do I need to join a click?

Discussion in 'Cisco/Linksys Wireless Routers' started by Commandercody, Nov 7, 2005.

  1. Commandercody

    Commandercody Network Guru Member

    I have 5 ip address assingend to me and I can't figure out how to have the router see a ip address assigned to my nic card in the server. It don't want to give 192.168.1.XX to my server, I can't run a dns on this IP. Can anyone help with this?

    Here is the order Dmark to a Bridged modem then to a WRTT54G as the ip 86.43.89.166 then from the hub in the router to my server. My router is set to PPoE, with ip's in place. I see below that router ip is 192.168.1.1 and 255.255.255.0 and the only way in can surf is to let the router give my server an ip of 192.168.1.100 orXXX . Can any one point me to a white paper for help?

    Thanks
    Mike Stewart
     
  2. matthiaz

    matthiaz Network Guru Member

    I dont get the question...
     
  3. Commandercody

    Commandercody Network Guru Member

    Clairifaction of question

    I want to run a mail,DNS,web,ftp server behind my router.
    I have 5 ip address assigned to me 68.89.34.161-165.
    In my router I have the internet ip address as 68.89.34.166 and sub at 248 and gateway as 165.
    all I need is to have the router see the ip address on my server nic card Example 68.89.34.162, it wants to assign a 192.168.1.XX number.

    my speedstreem modem is set to bridge, my router is set to ppoe

    I hope this helps.
    Mike Stewart
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice