1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

6rd tunnel on toastman/shibby/victek? Anyone done it?

Discussion in 'Tomato Firmware' started by mbreslin, Feb 2, 2012.

  1. mbreslin

    mbreslin Networkin' Nut Member

    Hi I'm new but have been lurking for quite awhile, thanks a lot to all the hard work done by this community!

    I'm currently using dd-wrt with my wrt320n with a manual startup script to setup a 6rd tunnel with my isp (charter). Has anyone done this on a tomatousb-mod'd firmware? I seem to get much greater wan to lan throughput on shibby or toastman's firmware but not having my 6rd tunnel keeps me stuck with dd-wrt. I'd really love to get off dd-wrt. Of course I could set up a HE/SixXS tunnel as I have done before but my isp's own tunnel has been much faster with about the same latency as ipv4.

  2. mbreslin

    mbreslin Networkin' Nut Member

    I'll try 1 shameless bump.
  3. mbreslin

    mbreslin Networkin' Nut Member

    Just wanted to say I figured it out in case I can help someone else later. I've seen many people on other forums with the same problem. Moving the script from init to wanup fixed all my issues. Some of my work was being undone after init such as /proc/sys/net/ipv6/conf/default/disable_ipv6 etc.

    Wan to lan throughput on dd-wrt on my 320n is around 70mbit max. 91 max with shibby's tomatousb mod. I still get over 100 direct from modem to pc. The very last thing I can try is converting my 320n to an e2000, many people have reported a boost in wan speeds after the conversion.

    Either way to all the people responsible for tomatousb and its mods you've made it so I can get squeeze some life out of this router until I decide on which AC router I'll be getting at the end of the year. Thanks!

Share This Page