1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Accessing Linksys w/ IE7 Beta 3??? [SOLVED]

Discussion in 'Cisco/Linksys Wireless Routers' started by Aerodyne, Jul 5, 2006.

  1. Aerodyne

    Aerodyne Network Guru Member

    Hi all,

    I can't seem to find the configurations to allow IE7 beta 3 to connect to the Linksys web interface.
    It's on "https://192.168.1.1" what must I enable or add to IE7 settings... much obliged.

    Router: WRT54GS v 1.1
    Firmware Version : v4.70.8, Hyperwrt 2.1b1 + Thibor14


    TIA
     
  2. Thibor

    Thibor Super Moderator Staff Member Member

    there are no problems here using ie7b3, but i'm using http, not https.
    **EDIT** i can also connect using https, maybe check your ie configuration. can't tell you which to check/uncheck though, mine is working from default
     
  3. Aerodyne

    Aerodyne Network Guru Member

    My bad :oops: ... found what the problem was. I was using a proxy server ip addr to connect to the net!!! Anyway added 192.168.1.1 so I can bypass the proxy settings.

    If any body does have this issue in the future:
    Tools | Internet Options | Connections | LAN settings | Advance ... & you can just add the IP addr in the Exceptions part or chose to bypass the proxy for local addrs.


    HTH
     

Share This Page