1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

accessing wrt54g (v5.1) with dd-wrt

Discussion in 'DD-WRT Firmware' started by arjennap, Apr 6, 2007.

  1. arjennap

    arjennap Guest

    accessing webserver WRT54G (v5.1) with dd-wrt

    After is made some (stupid) mistakes in the config i decided to reset the router.
    I pushed the reset button for 30-40 seconds and tried to connect my router. The problem is that is see they first page but after that the webserver is not accessable. after a short reset (1 sec) I can access the interface again but just for a sec or 5 after that it lookes like the webinterface hangs itself. After that is still possible to ping it and also with telnet i can make a connection.

    some can help me plz. maybe i can use telnet to resend a firmware to it?
  2. Slimey

    Slimey Network Guru Member

    try telneting in and issue the command "mtd erase /dev/mtd/3" and reboot the router. see if that helps.

Share This Page