1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

add dns to ixp1 rv082

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by shoaktim, Jul 11, 2013.

  1. shoaktim

    shoaktim Reformed Router Member

    how to add dns for telnet to ixp1?

    -------------------------------

    dev
    (ixp1
    (enabled(1))
    (type(1))
    (logical_network(1))
    (route_level(1))
    (metric(40))
    (mtu(1500))
    (is_auto_mtu(1))
    (default_route(1))
    (has_ip(1))
    (is_support_promisc(1))
    (is_wan_man(1))
    (is_wan_data(1))
    (is_dns_neg(0))
    (rip
    (enabled(0))
    (input_version(3))
    (output_version(2))
    )
    (8021x_auth
    (re_auth_period(3600))
    (tx_period(30))
    )
    (wlan
    (8021x
    (rekey_timeout(900))
    )
    (key_mgt(0))
    (key
    (0
    (length(40))
    )
    (1
    (length(40))
    )
    (2
    (length(40))
    )
    (3
    (length(40))
    )
    )
    )
    (description(WAN Ethernet))
    (mac(d0:d0:fd:8b:a1:09))
    (alias)
    (dhcps(lease))
    (dyn
    (ip(192.168.1.95))
    )
    (is_bridge(0))
    (hb
    (enabled(0))
    )
    (is_sync(1))
    (prevent
    (enabled(0))
    )
    (is_advanced_wbm_routing(0))
    (static
    (ip(192.168.1.95))
    (netmask(255.255.255.0))
    (gateway(192.168.1.254))
    )
    (name_server
    (0(192.168.1.254))
    (1(10.51.16.21)) <<<<<<<<<< here add new dns (2(10.15.27.9)) but how!
    )
    )


    thankyou!!
     
  2. shoaktim

    shoaktim Reformed Router Member

    ready...
    rg_conf_set /dev/ixp1/name_server/(0,1,2,3) x.x.x.x

    bye
     

Share This Page