ADSL2MUE Bridged - how do I access management interface ?

Discussion in 'General Discussion' started by Anonymous, Oct 23, 2005.

  1. Anonymous

    Anonymous Guest

    I have successfully set up brand new (manufactured 09/2005) ADSL2MUE in 'bridged' mode and connected to BEFSR81 v2 router - broadband service working fine as far as I can tell.

    However, my home network runs as 192.168.0.nn, so I changed the IP address on the ADSL2MUE to 192.168.0.2 for it to be addressable within my existing network - default is 192.168.1.1

    BEFSR81 is DHCP server and 192.168.0.1

    Is there something I can change to fix this or must I resort to a reset and connect it to laptop and reconfigure from scratch if I need to check/change anything ?
     
  2. Anonymous

    Anonymous Guest

    one the modem is in bridged only mode i don't belive you can access the web interface from behind a router.

    each time you want to have a look at the modems config you need to wire directly from the modem to your pc.

    bummer.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice