1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ADSL2MUE Disconnection Odissey (:PLZ HELP:)

Discussion in 'Other Linksys Equipment' started by R0ut3r, Jun 6, 2006.

  1. R0ut3r

    R0ut3r Network Guru Member

    hi to all, like reported in some old threads i have a big problem with the asdl2mue modem (connected to a wrt54gs.. but using the modem only with a pc ppoe connection i have the same prob)
    this is the story, with the hope someone can give me a suggestion to solve this problem (sorry for the bad english language)

    for 2 years i used without problem other brand modem+router, but a day the modem had broken and so i bought the first router (with modem) found in a store: it was a wag54gv2

    with that one (used around 5 months) i haven't any conn problem, but looking in this forum i see the better wrt54gs.. so.. i sold my wag54gv2 and bought an adsl2mue + wrt54gsv4 (now running with dd-wrt firm)

    and all was fine (3/4 months using a massive p2p too) until.. due some test in a friend's office that has an unsupported adsl2mue protocol (original firmware) , i have upgraded the firm with the new 4.19
    well, maybe was not a firm update related problem.. but after some days (i dunno if the disconnection was firm related) the connection began to drop every (around) 4 days, and at every disconnection the only thing possible was turn-off/on the adsl2mue and waiting for the reconnection (no chance using the reconnect "button" in dd-wrt or the connect/reconnect using the pc-pppoe)

    after some days the connection last only two days..

    so i tried the newest firm: the 4.22
    after that i had a disconnection every 20/30 minutes
    (and always the need to turn off the adsl2mue for reconnect, and without p2p client running)

    ok.. i decide to use a wag54gv2
    (many firends have bought that one due the good stability, and someone buy 2 units.. one for a backup)

    ok connected ... no prob at all for 2/3 weeks: no disconnection and p2p active without any prob

    5/6 days ago i returned to the old adsl2mue (but a new one, with the factory firm)+wrt54gs configuration... and AGAIN .. every 2 days the line drop and i must turn-off the adsl2mue to reconnect (same with a pc-pppoe connection), and WITHOUT any p2p clients
    sorry for the long post (and the bad english language: i hope that the situation is clear)

    in few words: i used an adsl2mue+wrt54 environment without problem times ago , but now doesn't works
    but i have no prob at all using another modem-router
    the modem is configured like a bridge only, and the router for a pppoe connection

    any user can give me a suggestion or trick?

    regards
     
  2. HiSpeed

    HiSpeed Network Guru Member

    Hi R0ut3r,

    From what I see on my french forum, the WAG54G v2.0 seems more stable than the ADSL2MUE probably because it uses a better firmware on the same TI AR7 chip...

    For example, it is possible to choose the ADSL modulation on the WAG...
     
  3. R0ut3r

    R0ut3r Network Guru Member

    ty, as usual hispeed :)
    so in other words: doesn't work? :eek: :eek:
    the strange thing is that for 3/4 months i have no prob at all
    hmmm arm7.. i give a look to the openw.. but seems to be too complex for a simply modem (no gui :( )
    one rma is already opened but i have the modem here, i'd liked to solve the problem here ....

    so: rma for two adsl2mue devices? :eek:
     
  4. HiSpeed

    HiSpeed Network Guru Member

    Didn't you have a DSLAM change ?
     
  5. R0ut3r

    R0ut3r Network Guru Member

    i dunno, but i don't think
    edit: verifyed, same dslam as before :(
     
  6. R0ut3r

    R0ut3r Network Guru Member

    :cry:
     
  7. NickH

    NickH LI Guru Member

    Try changing your power supply brick, I think the supplied 1a one is right on the lower limit, either that or linksys have had a bad batch or power supplys. Mine just started to exhibit similar behaviour and had been fine for over a month. I've hooked mine up to my pc's 5v supply and it now seems to be ok.
     
  8. R0ut3r

    R0ut3r Network Guru Member

    ty for the suggestion, but i have already tryed it (taking the 0v and the 5v from an atx power supply)
     

Share This Page