1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Alchemy 1.0 final has been released publicly

Discussion in 'Sveasoft Firmware' started by littlewhoo, Apr 21, 2005.

  1. littlewhoo

    littlewhoo Network Guru Member

    It seems, that Alchemy 1.0 final has been released publicly. At least there is now a firmware file called "Alchemy_V1.0.bin.zip" in the public -> Stable Firmware folder in the downloads section of the Sveasoft site. I think, that this section can also be accessed by non-subscribers.

    At the moment there is no public announcement of the Alchemy release at the Sveasoft site yet. The text at the download page says:

    "Alchemy-V1.0 public release.


    This firmware is for WRT54G V1.0, V1.1, V2.0, V2.2 and WRT54GS V1.0, V1.1 routers only.

    Alchemy-V1.0 is a unified firmware for both G and GS models. This firmware
    can only be upgraded using the web interface. IF YOU HAVE A FIRMWARE UPGRADE
    FAILURE WITH ALCHEMY - you must use an older firmware version whose size is
    under 3,145,000 bytes and reflash using tftp. Reflashing with tftp will not
    work with firmware versions larger than 3,145,000 bytes in size.

    Always reset your router to defaults after upgrading."
  2. Cornel

    Cornel Network Guru Member

    Where can i download this firmware?
  3. JohnSK

    JohnSK Network Guru Member

    The download section is only for subscribers.. please mirror it localy if you can, since it's a public release I guess this doesent violate any rules.

  4. littlewhoo

    littlewhoo Network Guru Member

    At the moment I can't mirror it, because it's only the binary of the firmware and the sourcecode is not yet available. With providing the binary without the sourcecode I would violate the GPL. But according to a post in the Sveasoft forum, at the moment James is preparing the sourcecode for public release.

    So I think soon you'll be able to download binary + source here at Linksysinfo.

    I don't have enough webspace to host binary + source. but as soon as source of Alchemy 1.0 has been publicly released, I can provide eDonky links to both, if you are interested.
  5. Couledouce

    Couledouce Network Guru Member

  6. Cornel

    Cornel Network Guru Member

    Flashed OK here... Version 2.2
  7. qingz

    qingz Network Guru Member

    Will it work with v3?
  8. jagboy

    jagboy Network Guru Member

    it might depending on what source they use from linksys.
  9. Cornel

    Cornel Network Guru Member

    Where is the WDS settings?

    or is there not any?

    forget it, i found it!
  10. FDM80

    FDM80 Network Guru Member

    I know people running pre7a on a v3 router so there is no reason why the final shouldn't work on a v3. Just remember that except for an extra hardware button on the front, the v3 is identical to a v2.2
  11. joebloggs

    joebloggs Network Guru Member

    Is this better/newer/more stable than AlchemyPre7? I've been running that with good results and don't know if I should mess around with this public release.
  12. jagboy

    jagboy Network Guru Member

    it is not that great. if you want this firmware then reconsider and download dd-wrt pre4.

    most of the things in the firmware are all outdated like the firewall
  13. jdepew

    jdepew Administrator Staff Member Member

  14. Toxic

    Toxic Administrator Staff Member

    tbh no one knows. there wasn't much testing on this afaik.
  15. RAST

    RAST Network Guru Member

    It's running on my v3 right now -- works great :)
  16. smithy

    smithy Network Guru Member

    Is there any updated documentation for Alchemy v1.0?
  17. imakoki

    imakoki Network Guru Member

  18. rholas

    rholas Guest


    I have a problem with Alchemy v1.0 and WRT54GS v2.0.
    Seens like isnt wireless connections. Clients dont see the router.

    A used Alchemy Pre7a without error.

    Sorry my weak English.
  19. Toxic

    Toxic Administrator Staff Member

    Alchemy v1.0 final officially doesn't support WRT54GS v2.0, this maybe why compatability was changed to support lower versioned wrt's
  20. aledr

    aledr Network Guru Member

    I tried Alchemy pre7a and 1 final in the V 3 and the Client mode didn't work... Only OpenWrt works fine in the Client mode with V3 of WRT54G. :(
  21. barkmann

    barkmann Network Guru Member

    first Alchemy bug I've noticed - +0930 GMT time zone broken

    Alchemy 1.0 flashed fine and so far no major issues I've found, except the router (WRT54GS v1.0) refuses to accept +0930 GMT as a valid time zone - it is happy with +1000 GMT so I am using that now...close enough :)

    Cheers Chris
  22. zerocool

    zerocool Guest

    Problem flashing the Alchemy 1.0

    I've tryed to update my WRT54G v2.2 to Alchemy 1.0, but it doesn't work with using the web interface. I've tryed flashing with TFTP, but it just says "wrong code pattern" !

    can someone tell me how i can get this firmware into this damn router?
  23. littlewhoo

    littlewhoo Network Guru Member

    Re: Problem flashing the Alchemy 1.0

    Alchemy is too big to be flashed with TFTP, so you'll have to use the web-interface.

    Just be sure, that HTTPS is turned off before flashing, otherwise it won't work. And it's also highly recommended to do a long reset (>15s) before and after flashing a new firmware, to reset everything to the default settings.
  24. rtoledo

    rtoledo Network Guru Member

    are you sure you can load pre7a or 1.0 final into a G ver 3.0?

    I have not done it cause it does not show on their web site.

    you had no problems other than the client mode issues?
  25. ph4nt0m

    ph4nt0m Network Guru Member

    I'm using a WRT54GS v1.1 with the new sveasoft final, but my problem is that the "Max Idle Time" box only accepts numbers between 1-9999. I want my router to be connected everytime, so I have to put in a 0. But I just get a popup, telling this number is not allowed.

    Is there anybody with the same problem and a solution?

  26. littlewhoo

    littlewhoo Network Guru Member

    If your router should be connected always to the internet, you should check the box "Keep Alive: Redial Period" and not "Connect on Demand: Max Idle Time".
  27. ph4nt0m

    ph4nt0m Network Guru Member

    I found this in the Setup Help. ;)

    What should I put into the Redial Period box?
    The Help File says:
    What does "ckeck" mean? Will the router now do a redial to my ISP every 30 seconds??

  28. _Shorty

    _Shorty Network Guru Member

    check: to inspect, examine
  29. LucasMoon

    LucasMoon Network Guru Member

    I am sorry but where to download 1.0 of that firmware..is it 1.0 ?

    cause on WRT54G.com website in there dowloand section saying the 24 mai 2005 date release but....you look at the bin it was modify the april 21 2005.
    this is not new.
  30. pipdipchip

    pipdipchip Network Guru Member

  31. LucasMoon

    LucasMoon Network Guru Member

    Thank you

Share This Page