All static WDS using 2xWRT54G's & Cablemodem tutorial?

Discussion in 'Networking Issues' started by GhostDoggy, Jul 21, 2005.

  1. GhostDoggy

    GhostDoggy Network Guru Member

    The last tutorial I was directed to was for 2xWRT's for WDS, but it was a scenario for 100% DHCP LAN and ADSL WAN. I currently have a pair of v2 WRT54G routers, one running native Linksys firmware and the other Satori. Cablemodem uses leased DHCP IP for the WAN IP. Current setup isn't employing WDS:

    Motorola<-->WRT54Gsatori<-->wiredLAN

    I would like to employ WDS to utilize a hands-off approach of wireless connectivity with a computer downstairs. I want to connect that computer to the second WRT (call it WRT54Gnative) via hard-wire, and then wirelessly connect that router to the WRT54Gsatori using WDS.

    Motorola<-->WRT54Gsatori<-->wiredLAN1
    ***********************<..WDS..>WRT54Gnative<-->wiredLAN2

    With the exception of the leased WAN IP, everything in my current setup uses static non-routable addresses on the 192.168.1.x network. The WRT54Gsatori is running Satori-4.0 v2.07.1.7sv.
     
  2. GhostDoggy

    GhostDoggy Network Guru Member

    Either I've stumped the forum (I know I stumped myself :oops: ) or I just bored the heck with it. I gather there is 'some' interest because +20 people viewed the post.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice