1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Alternate firmware feature questions

Discussion in 'Linksys Official Firmware' started by ellinj, Mar 7, 2005.

  1. ellinj

    ellinj Guest

    Do any of the alternate firmwares, HyperWRT, Sveasoft, etc have the ability to map ports. Ie, I want requests on ports 7878 to be mapped to a machine internally on port 80. I have an application that doesn't allow me to change ports and 80 is blocked by my isp.
  2. easymac

    easymac Network Guru Member

    port forwarding already allows you to do that.
  3. Guyfromhe

    Guyfromhe Network Guru Member

    you can do that with iptables afaik you can't do that with stock firmware though or via the web interface.
  4. Ogiewon

    Ogiewon Guest

    The screenshots of Talisman appear to have that ability.
  5. Airey001

    Airey001 Network Guru Member

    What you are looking for is
    UPNP Port Forwarding

    Like in the old Linksys befsr41. I have good news and bad news. The good news is that the WRT54G and most newer routers have this function. The bad news is most don't have a web page to add these port forwards. You have to set it up through windows and UPNP.

    First you have to make sure UPNP compont of windows is installed.
    Then you well see an icon for Internet gateway(Router) in your Network connections in the properies there is the location to add the UPNP Port Forwards.

Share This Page