AM200 (half bridge) behind WRT54GL not accessable to log on

Discussion in 'Other Linksys Equipment' started by SideshowBob, Apr 10, 2008.

  1. SideshowBob

    SideshowBob Network Guru Member


    The problem is when i connect the modem on the router WAN port it is not accessable anymore.
    The modem is in Half-Bridge mode but when connect to a PC whit an static IP then all is just fine.

    AM200 ( to the WRT54GL WAN port connected.
    WRT54GL (

    Why can't i log in the AM200?

    A ping to the AM200 results in 100% packets lost.

    I do some googling and foud at a German site a saloution but dont want to use it this way, look at the picture for yourself:

    Any help is welcome!
  2. jochen

    jochen Network Guru Member

    The router only routes from LAN to WAN port if the IP address is on a different network. Since your AM200 has the same network address, the packets dont go to the WAN port.
    I would suggest you changing the IP address of the AM200 to a different network (e.g. and add a static route to 192.168.2 in your WRT54GL.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice