1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

another afterburner and wds thread

Discussion in 'DD-WRT Firmware' started by whatsthedeal, Jan 2, 2006.

  1. whatsthedeal

    whatsthedeal Network Guru Member

  2. BrainSlayer

    BrainSlayer Network Guru Member

    maybe. try it
     
  3. whatsthedeal

    whatsthedeal Network Guru Member

    nobody else wants to be the test monkey? i'll give it a try shortly and see if it makes any difference.
     
  4. whatsthedeal

    whatsthedeal Network Guru Member

    ok i tried it using v23 std on both a WRT54G v2.2 and wrt54gs v3.

    -turned on afterburner in the web interface
    -telnet to each router and type the nvram set wl_afterburner_override=1;nvram commit

    file transfer after afterburner override: 3% of 54mbps

    i then went back to the web interface and set the afterburner option to auto. this set the transfer rate to ~22% of mbps which is about what i got before doing it. so it seems to do more wrong than right.

    telnetting back to each router and typing:
    wl afterburner_override

    a value of -1 is returned. so it seems like it's back off now.
     

Share This Page