1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Anybody using dual wan?

Discussion in 'Tomato Firmware' started by mikester, Aug 12, 2009.

  1. mikester

    mikester Network Guru Member

    One of my WRT54GL's has a fragged WAN port - I was thinking of trying to use it by changing one of the LAN ports to WAN.

    Anybody using the Dual Wan option? I'm a little weary of the "made in china" solution for obvious reasons....
  2. bogderpirat

    bogderpirat Network Guru Member

    you don't need a dual wan firmware for that - you can simply reassign one of the lan ports to be the wan port - using nvram variables only.
    for instance, doing this would put lan port 4 (from left to right) into the wan's vlan interface:
    nvram set vlan1ports="0 5"
    nvram set vlan0ports="3 2 1 5*"
    nvram commit
    note that this will only work properly if you have a GL. if you have a WRT54G of some sort, you'll have to adapt the port numbering according to your switch's numbering scheme.
  3. mikester

    mikester Network Guru Member

    Sweet! You the man!

    Wait...do I have to add these via SSL or the GUI under INIT scripts?
  4. bogderpirat

    bogderpirat Network Guru Member

    one-time thing via ssh or telnet.
  5. erratic81

    erratic81 Guest

    Thanks for the post. I was in the same predicament with a failed WAN port. This worked like a charm!

Share This Page