ASA 5505 and PIX 501 -> Wrv200

Discussion in 'Other Cisco Equipment' started by andy789, Feb 6, 2008.

  1. andy789

    andy789 LI Guru Member

    Does anyone know if it is possible to make a site to site VPN tunnel connection between an Cisco ASA 5505 and an Linksys Wrv200.
    Alternative Cisco PIX 501 and Linksys WRV200.
    And if so, what would I have to do to make it work.

    / Anders
  2. Toxic

    Toxic Administrator Staff Member

    yes it is possible afaik need to get doclarge on this since he was testing against my ASA5505.

    Jay you there man?
  3. DocLarge

    DocLarge Super Moderator Staff Member Member

    Yeah, dude, I'm on point!!! :)

    Andy, yes it can be done. I'm a little rusty with my Pix since I've focusing more on IOS. The link to set up this connection is below:

    Simon and I were able to get my WRV200 connected to his ASA unit, to include my being able to download files. The above link shows the "particulars" on creating the pix policy. Again, it's been a while since I've had my Pix out and configured; mastering (or should I say "trying to") IOS has taken up a majority of my time. If it gets too messy, we'll just pull Eric (Stewart) in the mix :) but this should help.

    Keep in mind, what ever settings you use for the PIX/ASA (i.e., 3DES/SHA1) needs to be the same on the WRV200.

    Have you set up vpn's before, if I may ask?

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice