1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Attach multiple IP's to WAG54GP2

Discussion in 'Other Linksys Equipment' started by inckie, Dec 1, 2008.

  1. inckie

    inckie Addicted to LI Member


    i got a Linksys WAG54GP2 router/modem. My isp gives me 6 ip's, is there a way that i can route all 6 ip's ?

    right now only one ip is attached to it's wan interface

    the reason im asking is that i got a server which i would like to have it's own IP, if i could route one ip to a specific port.

  2. ifican

    ifican Network Guru Member

    The easiest way for you to do this is to get a switch and put it inline after the cable modem. You can then run several severs or ip's from your range at the same time keep your lan hosts protected from the server if it was to ever get compromised and also still let your lan hosts sitting behind the router access the server and the internet.
  3. inckie

    inckie Addicted to LI Member

    WAG54GP2 has built-in modem, i has no modem from my ISP

    This router has something called "PVC" you can create multiple "PVC's" but when i do this, i can't access the router anymore

Share This Page