1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BEFSR81 v3 NTP issue

Discussion in 'Cisco/Linksys Wireless Routers' started by Jiriki1, Oct 31, 2005.

  1. Jiriki1

    Jiriki1 Network Guru Member

    Since upgrading my BEFSR81 to firmware 2.50.6_beta2 it doesn't stop working as often as it used to on the 2.50.4 firmware. However, since then I can't get NTP to work, not on a Windows XP machine (internet time sync), nor on a Linux machine (ntp 4.2.0.a).

    Does anyone who had the same problem have a solution? I tried opening ports, even tried putting one machine in the DMZ but they still can't connect.
  2. Jiriki1

    Jiriki1 Network Guru Member

    I found out what caused this problem: "IPSec Passthrough" has to be enabled for this to work...

Share This Page