1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BEFSX41 and using the Cisco VPN client -- HELP!

Discussion in 'General Discussion' started by kkingsto, Sep 29, 2006.

  1. kkingsto

    kkingsto Guest

    I have a BEFSX41 at home and I think I have it configured correctly.

    When I fire up the Cisco VPN client to connect to my office Lan, it works and I'm connected. I can ping servers on my office's lan. I can't browse intranet pages or anything else.

    If I change the BEFSX41 so that the firewall is OFF (bad idea I think), the VPN session works fine (I can browse the intranet as well as remote desktop to my work PC).

    What am I doing wrong? I have IPSec passthrough turned on.

    My internal net is Office uses a 10.x.x.x subnet.
  2. G_Styles

    G_Styles Network Guru Member

    You need to tell the cisco VPN client the ip address of your DNS and WINS server at work. If your VPN client does not allow you to fill this in, you can add it to your tcp/ip settings for your network adapter. For now, you can use the ip address info to get to your intranet and RDP. Just punch in the IP address of your workstation into the RDP client and it will work. Same as typing in the ip of you intranet site into internet explorer.

Share This Page