1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.


Discussion in 'Other Linksys Equipment' started by adrianm, May 23, 2005.

  1. adrianm

    adrianm Guest

    Hi !

    Anybody know how can i setup vpn between befsx41 and winxp or WRT54G V2 ?
    Il will be nice if anybody have a document with step by step configuration.

    Thanks in advanced
  2. Geezer25

    Geezer25 Guest

    BEFSX41 Setup

    Try cnet.com. They were quick in response, quite knowledgeable.

    Unfortunately, I still cannot get my BEFSX41 to log onto to the Internet through my Comcast cable. I just checked the firmware version; it's April 30, 2004 so it's current. Another day shot all to ... trying to get it working. I've lost a lot of time trying to get this router to connect to the Internet.

    I'd installed a Linksys router for a friend once before. That one went very easy. Piece of cake. This router is a nightmare if one is not ready to deal with all of the technical issues. Heck, I just wanted a good Linksys router. Oops.

    Lesson learned: never let the salesperson talk you into unfamiliar product models just because they are out of stock with what you wanted in the first place.
  3. cdiaz

    cdiaz Network Guru Member

  4. tfrancois

    tfrancois Network Guru Member

    The solution is to downgrade the firmware to version 1.50.9 from the 1.50.10. The installed firmware 1.50.10 DOES NOT PERMIT access to the internet for some reason. I downgraded to 1.50.9 and everything worked fine.
  5. tfrancois

    tfrancois Network Guru Member

    I forgot to tell you where to find it. Just go to ftp://ftp.linksys.com/pub/network and look for the file. I think the filename should be BEFSX41_v1.50.9_code.bin. Good luck and happy surfing.

Share This Page