1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BEFSX41 VPN only routes in one direction

Discussion in 'Cisco/Linksys Wireless Routers' started by hjakeor, Oct 3, 2007.

  1. hjakeor

    hjakeor LI Guru Member

    I have configured a BEFSX41 at each of two locations,

    location A private is 192.168.1.0 /24 gateway 192.168.1.1

    public is dynamic DNS and updates properly

    I have two terminal servers at 192.1681.1.100 and 200



    location B has private set to 192.168.2.0 /24 gateway 192.168.2.1

    public is also dynamic DNS and updates properly

    I have some local printers and PCs at 192.168.2.50 through 65



    from site B I can ping anything at site A

    but from site A I can only ping the inside private ip at site b 192.168.2.1 and

    nothing else on site b. I therefore can not print to the IP printers or the

    shared printers on the workstations at location B from the terminal server located at

    site A.

    I have disabled the firewall setting on both sides, reduced the MTU to 1365 on both sides,

    Selected aggressive mode on both sides, as well as turned on keep alive option on both sides.

    I still can not communicate in both directions. This is very strange to me.
     
  2. ifican

    ifican Network Guru Member

    Are the devices you are trying to communicate with connected directly to the bef? If there is nothing else blocking traffic I would put a packet sniffer on a box on each side and see whats really going on when you ping both ways. This way you can better determine where the hangup is and move on from there.
     
  3. hjakeor

    hjakeor LI Guru Member

    direct connect

    Yes they are connected directly to the router. They only have a couple of work stations and 2 printers at the second location.
     

Share This Page