1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BEFW11S4 Router problem

Discussion in 'Other Linksys Equipment' started by Abhorsen, Sep 1, 2005.

  1. Abhorsen

    Abhorsen Guest

    Hi there,
    I know there are other topics similar to this, but none exactly like it so I thought I'd ask. Have been having problems with my BEFW11S4 needing to be unplugged and then re-plugged in every 5 minutes or so as it stops responding, cannot be found ( I thought that I should update the firmware to see if that would fix the problem, however whilst I was doing this-yet again the router stopped responding and didnt update properly-ever since then i've not been able to boot it properly without the power led flashing continuously. and i haven't been able to access the setup page. I am wondering if anyone has any new fangled ways of doing a hardware reset on the router that will get me back to a stage of it functioning...even just a little bit...or have a screwed it up?
    Thanks in advance

  2. HughChardon

    HughChardon Network Guru Member

Share This Page