1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BEFW11S4 v4 - Losing Wireless Connection

Discussion in 'General Discussion' started by Anonymous, Jun 27, 2005.

  1. Anonymous

    Anonymous Guest

    Setup:
    Linksys BEFW11S4 v4 with lastest firmware. WEP enabled.
    3 XP desktops (D-link adapter) and 1 win 2000 laptop (Cisco adapter) all connected wirelessly.
    Everything works fine for a couple of days and then suddenly, the wireless connection is lost on all clients. Light on the router says wireless is working. Also adapter wireless utlities and Netstumbler show the wireless as active.
    However, I cannot connect to it. I have to power off the router and power on and things are normal (for another couple of days )

    Any ideas ?

    Thanks.
     
  2. Anonymous

    Anonymous Guest

    Hello,
    i have a compare Problem with this Router, the Wlan conection is broke evry 8 hours every day. The Fimrware in my Router is 1.50.0 and the Hardware Release is Version 4.
    What Firmware have you in the Router ?

    Chris
     
  3. Anonymous

    Anonymous Guest

    I had 1.52 until this past weekend. I downgraded to 1.50 over the weekend to check if it will make a difference.
     
  4. Anonymous

    Anonymous Guest

    worked for 2 weeks now

    After downgrade to 1.50.14 and turning off DHCP, everything seems to be working.
     
  5. Anonymous

    Anonymous Guest

    1.52 makes it so if you disable SSID transmit, you basically turn off wireless.

    I'm searching for 1.50.14 to downgrade back to, a link would be nice

    Rook
     
  6. Anonymous

    Anonymous Guest

    if you turn off ssid it doesn't disable the wireless.. you just stop broadcasting your id.. which makes it harder for leechers to get on to your network you still send a wireless signal .. the connectivity issue seems to be a problem with this model. i would change out the server and save yourself the headache
     
  7. Anonymous

    Anonymous Guest

    lossing wireless connection

    Hi

    In my case radio in AP stopworking after about 2900 sec. I'm useing WEP . firmware 1.52.2.
    1.50.14 no problem > 1.52.14 problem with lossing connection > 1.50.14 problem still occure > 1.52.2 still occure.
    Have you any idea howto solve the problem?

    Thanks Adam
     
  8. jonwells

    jonwells Guest

    Did you mean change out a server, or change out the Linksys?
     

Share This Page