BEFW11S4 with Firmware 1.50 and WPA

Discussion in 'Other Linksys Equipment' started by chris-berlin, May 15, 2005.

  1. chris-berlin

    chris-berlin Network Guru Member

    Hello ...

    I have a big problem with these router and wpa. When we use the ap of the router with wpa, we must restart (by making the router powerless) the router after 8 hours and 30 minutes. When we did that the router works for another 8h and 30 min. When we use wep this don't happen. But for the real security we are forced to use wpa in our wlan.

    Without the restart (in wpa modus) the integrated switch works along and don't need a restart, only the ap needs the restart to work with wpa.

    Does anybody have a solution or knows this problem and can help me.

    thanks Chris
  2. chris-berlin

    chris-berlin Network Guru Member

    Has everyone no Idea for my Problem ?

  3. Cjaiceman

    Cjaiceman Network Guru Member

    Sorry to hear about your problem, but I don't think anyone has a fix. I have a Linksys BEFW11S4 V4 as well and I WPA and I don't have this issue. I would say try reflashing it with the firmware again. If that doesn't work then it maybe time to look into a WRT54G, make sure you do the latest firmware as they have added WPA2 with TKIP+AES. Good Luck.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice