1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Belkin F7D4302 and simular - optimizing Signal and Transmit Power

Discussion in 'Tomato Firmware' started by Livin, Aug 16, 2012.

  1. Livin

    Livin Serious Server Member

    Reaching out to users of Belkin F7D4302 and similar (Play / Play Max)... Please share your testing, results, and tweaks.

    I'm interested in increasing distance (priority 1) and throughput?

    I'm using Toastman ( tomato-K26USB-1.28.0500.4MIPSR2Toastman-RT-N-VLAN-VPN-NOCAT) with Transmit Power at 70 for both G & N... but I have not really noticed much difference by changing this?

    My router sits 3' off the floor (on my desk) and seems to have a decent strength at 20-30' reducing to barely, if at all, usable at 40-45'. Internally it goes through a wall or two, and externally it goes through 2 internal, 1 outside wall... but this seems to make very little difference in my case.

    thanks for sharing!
     

Share This Page