1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

best security for ap+wds

Discussion in 'Tomato Firmware' started by masterbeto, May 16, 2007.

  1. masterbeto

    masterbeto Network Guru Member

    i have 2 ap in ap+wds mode, whats best security for it ?
     
  2. HeatSurge

    HeatSurge LI Guru Member

    WPA Personal is the "highest" supported in WDS, I've heard.

    I recently had grief with Wireless Ethernet Bridge mode and WPA2, so don't be surprised if WPA2 doesn't work.

    I'd personally choose WPA Personal with TKIP/AES + a good strong key and a 10 - 30 minute renew interval.
     
  3. M_ars

    M_ars LI Guru Member

    My Config:
    --> 1 AP + WDS
    AP with Tomato:
    WDS router: DD-WRT V23 SP2 micro
    WPA2 + AES is running without any problems :)
     
  4. masterbeto

    masterbeto Network Guru Member

    changing 2 ap+wds to ap,wet+ap

    i have problem with lose packets using one wrt54gv4 b mode all rate wep omni 8dbi and WHR-HP-G54 b mode all rate wep omni 25dbi, total users in static dhcp 45 but if 20 or 25 users actives in same time, start lose packets from aps.
    any have any solution for it ?
    im try change now to wrt54gv4 b mode all rate wep omni 8dbi (ap mode only) in first point, wrt54gv4 wet mode directional 24dbi <= rj45 cable => WHR-HP-G54 b mode all rate wep omni 25dbi (ap mode only)
    my question now if i change ap+wds to ap,wet+ap all wep mode it solve my problem qith packet lose? or i need change wep to wpa?
    any here have more then 25 clientes actives using wds?
    plz if any have any trick solution or anyhing plz tell ...

    thx for all
     
  5. timmy33

    timmy33 LI Guru Member

    thats nice to know that WPA IS supported under WDS,

    I've been trying to get my wrt54gs with thibor 15c firmware working with my airport express (firmware V6.3), weird thing is that WDS works if you have no encryption or WEP encryption but it doesn't seem to work with WPA. I have now switched back to WPA encryption without WDS working and it seems all happy.

    any suggestions on how to get WPA working with WDS would be appreciated.
    WRT54gs is version 2.
     

Share This Page