1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Beta Firmware for WAG54G V2 Australian Model

Discussion in 'Other Linksys Equipment' started by wag54g, May 28, 2005.

  1. wag54g

    wag54g Network Guru Member

    Here is the latest beta for WAG54G V2 Australian Model - v1.00.57 beta. (as well as the original firmware that Aus models come with - v1.00.39)

    Note that 1.00.57 is a beta version, and should only be installed if you know what you're doing. NB - This is a generic (non- AU version), so you will need to set VPI=8 and VCI=35 on the main setup page of the router OR IT WILL NOT WORK IN AUSTRALIA!!!

    Also, don't use this if you are not in Australia because it might turn your router into a brick!

    If you are going to be trying out different firmware, I would strongly suggest familiarizing yourself with TFTP.

Share This Page