1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BEWARE: WAP54G Firmware Version: 3.08 - HiPower 1.04

Discussion in 'Other Linksys Equipment' started by SideshowBob1969, Apr 2, 2007.

  1. SideshowBob1969

    SideshowBob1969 Network Guru Member

    --- WAP54G Firmware Version: 3.08 - HiPower 1.04 ---

    This firmware is NOT satble.

    Channels 1 to 5 are NOT working.
    Channels 6 to 13 wil work but is not stable.

    BEWARE!!!
     
  2. aetos

    aetos LI Guru Member

    Working very good on H\w V:2. all channels 1-13 ok!
     
  3. SideshowBob1969

    SideshowBob1969 Network Guru Member

    Hi,

    Can you mail me your firmware so I can try this one out?
    If you privat mail me i'll give you my e-mail address.

    Thanks in advance!!!

    Regards,
    SideshowBob
     
  4. aetos

    aetos LI Guru Member

  5. T-Rxx

    T-Rxx LI Guru Member

    is it working or not? i have the wap54g V.2 (Germany)

    can i use the same firmware as postet in aetos link? it seems to be for V3 versions only because of its name.
     
  6. adamcole

    adamcole LI Guru Member

    It is working great for me. Hasn't gone down yet. I just flashed it recently though. Monday at around noon but it's still going strong.
     
  7. T-Rxx

    T-Rxx LI Guru Member

    thx for posting. which hardware revision do you use? V1, V2 or V3?
     
  8. net314

    net314 LI Guru Member

    I can confirm that this firmware works fine with hardware v3 of WAP54G.
     

Share This Page