1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Bizaare problems with WRT54G and DD-WRT v22

Discussion in 'DD-WRT Firmware' started by dirtroad, Nov 6, 2005.

  1. dirtroad

    dirtroad Network Guru Member

    I'm looking for ideas of how to resolve this issue without replacing the hardware and wondering if anyone has seen it before.

    I have a WRT54G v 3.0 running DD-WRT v 22 Final Revision 2.

    It is part of a remote repeater setup. It is running as an access point, connected to a Smartbridges Airbridge that is wirelessly assoicated to another remote location. (For those not familiar, an Airbridge is almost identical to a WRT in client bridged mode but has a more powerful rado...it does MAC natting.)

    The Airbridge is connected to switch port #1.

    In operation, the WRT54G does not reply to ping, however devices associated to it do. I also cannot bring up it's web interface or telnet to it through the Airbridge, OR with a hardwired connection to a switch port. BUT I can connect to it from associated wireless devices.

    Furthermore, it is slowing everything down really bad. I can take my laptop to its location, hook the Airbridge up to my laptop and get the full 1024 kbps internet it is carrying. But if I plug the Airbridge into the WRT and associate my laptop to it, I only get about 200 kbps, sitting 3 feet away.

    Any ideas, other than swapping out the WRT?
     

Share This Page