1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Blinking WLAN /LAN LED

Discussion in 'DD-WRT Firmware' started by danr, Nov 13, 2005.

  1. danr

    danr Network Guru Member

    Unlike with the stock Linksys firmware, I see the WLAN LED blink, even when there are no connected clients. This 'scared' me at first, since I thought someone broke in to my WLAN.

    Also, the LAN LED blinks, even when the machine is off (the machine keeps the LAN card alive, when off).

    Maybe the router is reporting on information which is technically sent by the router, but is ignored by the stock firmware, since it isn't 'real' data?
     
  2. juanker

    juanker Network Guru Member

    Try disabling "STP", under Setup > Basic Setup.
    That worked for me.
     
  3. sq3hta

    sq3hta Network Guru Member

    STP disable



     
  4. Chuck_IV

    Chuck_IV Network Guru Member

  5. cgondo

    cgondo Network Guru Member

    in your case....STP shouldnt make a difference. STP is used when there are more than 1 switches interconnected together in a redundant way.
     

Share This Page