1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Bricked WRT54GS v1.1

Discussion in 'Cisco/Linksys Wireless Routers' started by fnordpojk, Mar 24, 2007.

  1. fnordpojk

    fnordpojk Guest

    Hi,

    I had White Russian RC2 on my WRT54GS v1.1, and decided to try out DD-WRT, so I TFTPd'd the DD-WRT image, upon which the router hung hard.

    Now when I boot it up, the power LED blinks and the router answers to pings on 192.168.1.1, and I can TFTP an image to it, but after I TFTP it stops responding to pings and just.. sits there.

    If I hold down reset and power it on, the power led blinks and DMZ blinks slowly, apart from that the situation is the same as above.

    I've tried the basic recovery tips that I've found (various reset button tricks, shorting pins 5&6, etc), but I always end up back in the same situation.

    Any tips, short of serial mod or JTAG?

    /fnord
     

Share This Page