1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Bridge with Linksys WAP54g

Discussion in 'Networking Issues' started by rob10, Feb 27, 2005.

  1. rob10

    rob10 Guest

    Hi,

    I'm using 2 Linksys WAP54g to connect 2 builds (about 2000mt and 6Mb/s) to share internet connection. I use the right antenna (WAP54g has 2 antennas). Now I would like to connect another build (1 to 2=2000mt, 2 to 3=600mt and 1 don't see 3). Every build has a LAN. The first LAN is from 192.168.1.1 to 192.168.1.50, the second from 192.168.1.100 to 192.168.1.150 and the last from 192.168.1.200 to 192.168.1.250

    Using 3 WAP54G and 4 antennas (1-2 and 2-3) can I use the second antenna (diversity) on the WAP54g in the second build to create a new link the build 3 ? Do you think is better to use a new couple of AP?

    Thank
    Rob
     
  2. u3gyxap

    u3gyxap Network Guru Member

    You cannot use the diversity that way. Either get a sector antenna for 2 that covers 1 and 3, or set up another unit.
     

Share This Page