1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Building the firmware....

Discussion in 'Linksys Official Firmware' started by wdca, Jun 24, 2006.

  1. wdca

    wdca LI Guru Member

    Hi!
    I've build the official firmware. The process went sucessfully but i can not flash the code.bin file.
    Code:
    # tftp 192.168.1.1
    tftp> binary
    tftp> rexmt 1
    tftp> timeout 60
    tftp> trace
    Packet tracing on.
    tftp> put code.bin
    sent WRQ <file=code.bin, mode=octet>
    sent WRQ <file=code.bin, mode=octet>
    sent WRQ <file=code.bin, mode=octet>
    sent WRQ <file=code.bin, mode=octet>
    sent WRQ <file=code.bin, mode=octet>
    sent WRQ <file=code.bin, mode=octet>
    sent WRQ <file=code.bin, mode=octet>
    sent WRQ <file=code.bin, mode=octet>
    sent WRQ <file=code.bin, mode=octet>
    received ERROR <code=100, msg=Invalid Password !!>
    Error code 100: Invalid Password !!
    
    Please HELP! :cry:
     

Share This Page