1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BW Limiter

Discussion in 'Tomato Firmware' started by shadowken, Jul 9, 2011.

  1. shadowken

    shadowken Networkin' Nut Member

    I want to make bandwidth throttling per user and make sure if it's necessary to enable both QOS and BW limiter to get it work properly , Is that necessary or not ? :confused:
    is there a HTB package to install it to Tomato firmware ?
     
  2. shibby20

    shibby20 Network Guru Member

    dont use BW limiter and QoS on the same time (not on my or Victeks mods). Only Toastman (if i good remember) use bw limiter on imq and this allow use QoS and BW limiter simultaneously.

    Tomato RAF (Victek, my or Toastman mod) has BW Limiter included.

    If you havent Tomato RAF you can write own HTB script and put it to firewall script. On my website you can find a HTB script generator
    http://openlinksys.info/downloads.php?cat_id=12&download_id=115

    (registration required)
     
  3. shadowken

    shadowken Networkin' Nut Member

    Thanks Shibby :)
    I forget to mention that i'm looking for BT also in Tomato if you can give me a link for it a stable one for Linksys E3000 , I don't know where to find it ... and thanks for the link too :)
     
  4. shibby20

    shibby20 Network Guru Member

  5. kthaddock

    kthaddock Network Guru Member

    Okey Thanks !

    I shall test that build. :eek:
     
  6. kthaddock

    kthaddock Network Guru Member

    It's working in -062 AIO build now, Thanks !

    EDIT
    I have tested -062 AIO first look user3 UL there but after awhile it's disappear.
     
  7. shadowken

    shadowken Networkin' Nut Member

    @shibby
    If i schedule to run a command into nvram at certain time e.g (nvram set qosl_enable=0 nvram commit )are enough to stop qoslimit service or not ?

    And how can i check if the qoslimit service has been stopped ?

    Thanks in advance :)
     

Share This Page