1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cable > BEFSR41 > WRT54G

Discussion in 'Networking Issues' started by br14n22, Sep 1, 2006.

  1. br14n22

    br14n22 Guest

    Ok, I am using a BEFSR41 with three computers hooked up in ports 2-4. I have a WRT54G running the DD-WRT firmware hooked into the uplink on the BEFSR41. All the computers wired to the network are fine, and the wireless computers see the WRT54G, but they won't connect to the internet. DO I need to change the router address on either of them? Could it be conflicting becuase both are 192.168.1.1? Any help is appreciated, thanks!

    BTW, the reason i'm using oth is so I'll have additional ports in the future, for more computers, xBox, etc.
     
  2. Guyfromhe

    Guyfromhe Network Guru Member

    did you connect lan port to lan port?
    You should never have 2 devices with the same IP on the same network, ever. If you do, change them before continuing.
     

Share This Page