1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Call to the Experts/RV082:set routing to dedicated link

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by nfdr1979, Nov 20, 2010.

  1. nfdr1979

    nfdr1979 Networkin' Nut Member

    HI to all!

    I need of you help to know where can I find guides/info/post/example about how to set a dedicated link for my RV082. Let me explain to you my issue:

    This link is a frame relay that provides connection to SAP and other services in http outside internet, the link is plugged without additional settings to a LAN port of the RV082 and this link does not provide Internet nor email. For users to access to this link at this moment they change the IP address of their machines from the automatic DHCP option to any address of the dedicated link network plus the default gateway of the link when they need to access the SAP and other services and later change again to automatic DHCP when finish consulting SAP.

    By other side the internet is provided by a cablemodem and a DSL that are using WAN1 and WAN2 ports.

    What I need to do?: that my users can access the link and the internet at the same time without changing IP address or adding routing tables on the Pc's nor don't provoke failures on internet browsing avoiding that Pc's looks internet or send emails by dedicated link. I have no idea about the correct set on the router to ccomplish this. How can you help me?! Is possible with RV082 do this?

    Thanks! NfDr1979!
  2. Toxic

    Toxic Administrator Staff Member

    sounds like you need to just add a routing table (router to that IP from an ip range)to the RV082's setup.

    I dont have an rv082 handy so can't comment where in the webgui it needs to be done however.
  3. nfdr1979

    nfdr1979 Networkin' Nut Member

    Hi Toxic!.

    I'm in agree with you, is a routing problem and perhaps entering the correct parameter on RV082 routing table would be work together both networks whitout doing changes on Windows DHCP parameters when users need to connect to other network; but I have no idea on how to accomplish this. there is no broad support about RV082 on this matter and people no post suggestions.


Share This Page