1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can´t flash WifiBox on WRT54G V2.2

Discussion in 'Other Firmware Projects' started by Lex, Jan 21, 2005.

  1. Lex

    Lex Guest

    Hi, I just bought 2 Linksys WRT54G V2.2. The original firmware is V. 3.03.1 . When I try to flash with WifiBox V. (used the update-function of the router) after 3 seconds I always get the message "upgrade are failed". I tried it on both devices. Also other firmwares behave strange: with Sveasoft Alchemy I can flash the router but I am not able to access the LAN-Ports anymore, only wireless works... even after downgrading to the original firmware the LAN-Ports are still dead. For me it looks like that the version 2.2 of the WRT54G probably has more differences from the version 2 than we know so far... Has anybody succesfully flashed a WifiBox-firmware on the WRT54G version 2.2 ??

  2. jdepew

    jdepew Administrator Staff Member Member

    There is different hardware in the V2.2 that the WiFi-box release wasn't written for. Regarding Sveasoft firmware, same thing on Satori, wasn't written for the V2.2 hardware and Alchemy hasn't been release yet to the public so all support for that should be directed at Sveasoft's forum. But the lateste Alchemy does support your hardware version, so you should be able to get some better answers through the Sveasoft support re: Alchemy. Thanks!

Share This Page