1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can 2 WRT54G be used together on the same NetWork

Discussion in 'Networking Issues' started by Dema, Mar 23, 2006.

  1. Dema

    Dema Network Guru Member

    IS it posable to have more then one WRT54G on the same network. Using it to get better range but stay on the same Network and still have internet. (example : my DSL is at my house and i have a office in a shop 2,000' from the house.) is this posable to do and how.
     
  2. jgutz20

    jgutz20 Network Guru Member

    There are a lot of possibilities for something like this, it just depends on if you need a wireless bridge, or if you have a cable run, what version of the routers you have etc. Check out this article: http://www.linksysinfo.org/modules.php?name=Content&pa=showpage&pid=7

    Give us a little more info like which version of the routers you have (look at the serial number on the bottom)
    CDF0 = WRT54G v1.0 / ADM6996L Chipset
    CDF1 = WRT54G v1.0 / ADM6996L Chipset
    CDF2 = WRT54G v1.1 / ADM6996L Chipset
    CDF3 = WRT54G v1.1 / ADM6996L Chipset
    CDF5 = WRT54G v2.0 / ADM6996L Chipset
    CDF7 = WRT54G v2.2 / BCM5325EKQM Chipset
    CDF8 = WRT54G v3.0 / BCM5325EKQM Chipset
    CDF9 = WRT54G v3.1 / BCM5325EKQM Chipset
    CDFA = WRT54G v4.0 / BCM5352E Chipset
    CDFB = WRT54G v5.0 / BCM5352EKPB Chipset
     
  3. Dema

    Dema Network Guru Member

    My router version is 3.01.3 there are no cable run and no bridge just 2 WRT54G's. What version should i have.
     

Share This Page