Cann't use wireless interface to access web.

Discussion in 'Tarifa Firmware' started by stedy6, Nov 9, 2005.

  1. stedy6

    stedy6 Network Guru Member

    Hi grate firmware exactly what I have been searching for, grate work. :)

    But I have a question.
    Is it possible to enable the web configuration tool for wireless clients from telnet?
  2. jchuit

    jchuit Network Guru Member

    To stedy6

    Thanks, but I don't understand the question completely, I think you like to configure the router in telnet?

    In telnet is allmost everything possible but what is the web-configuration tool for w-clients exactly?

  3. stedy6

    stedy6 Network Guru Member


    in the web config tool I disabled the possibility to enter the routers web config pages from wierless clients. i need to know if there is any possibility to enable this funktion whithin a telnet session(i got telnet acsess from my wierless clients).
    But i dot have access to web pages..
  4. jchuit

    jchuit Network Guru Member

    Yes, this is possible.

    Go to Telnet, set the specific NVRAM variable, and do a NVRAM COMMIT.

    You can block this by setting a password, then a client can't access Telnet and will not be able to change the nvram variables.

  5. stedy6

    stedy6 Network Guru Member

    nvram set web_wl_filter=0
    this line did the work. thx for the help :)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice