1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can't access router after changing IP of router

Discussion in 'Tomato Firmware' started by Gobbla, Mar 23, 2009.

  1. Gobbla

    Gobbla Addicted to LI Member

    Hey,
    I just bought a WRT54GL and flashed the firmware. No problems there.
    Then I changed the router's IP to 10.1.1.255. Now **** went wrong :/
    I also changed the DHCP assignment, to 10.1.1.1-5 with subnet 255.255.255.0.
    I see in IP-config that it does in fact assign a IP to my clients, BUT I can't access the router on the gateway IP. I have searched the web for a reset function, stating everything from pressing the reset key, to holding it a whole minute. Tried them all, still i cannot access it on the standard IP or my new one. Can someone please help me?
    Thanks.
     
  2. fyellin

    fyellin LI Guru Member

    You can't use .0 or .255. Those are reserved for the network and for broadcasting.

    Try doing a hard reset of your router and then talking to it on 192.168.1.1.
     
  3. Gobbla

    Gobbla Addicted to LI Member

    How do I do a hard reset?
     
  4. fyellin

    fyellin LI Guru Member

    Hold the reset button for 30 seconds.
     

Share This Page