1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can't access web interface

Discussion in 'Tomato Firmware' started by tarheels_100, Dec 6, 2009.

  1. tarheels_100

    tarheels_100 Addicted to LI Member

    I recently adjusted a few setting on my WRT54GL with Tomato, namely I changed the admin password for the web interface as well as changed it to secure access (HTMLS?). Now, a few days later, I can't access the router by the normal route of typing 192.168.1.1 into my browser because I get an "Unable to connect" error from Firefox. Any insight into this problem is very appreciated!

    Austin
     
  2. nvtweak

    nvtweak LI Guru Member

  3. Planiwa

    Planiwa LI Guru Member

  4. nvtweak

    nvtweak LI Guru Member

    FYI https is on port 443.

    It would only be 8080 if the port was changed from default. Or if accessing the router from the WAN. Neither of which was mentioned in the original post.
     
  5. tarheels_100

    tarheels_100 Addicted to LI Member

    That did it. Thanks a lot for the help!
     
  6. Planiwa

    Planiwa LI Guru Member

    Thanks for giving some meaning to my absent-mindedly overminimalized message. :) :)
     

Share This Page