Can't access wireless bridge from devices connected to main router

Discussion in 'Tomato Firmware' started by GhaladReam, Aug 2, 2011.

  1. GhaladReam

    GhaladReam Network Guru Member

    Ok, here's my setup. I've got an RT-N16 running shibby's 062 build currently. I also have an old La Fonera 2100 running Gargoyle 1.3.16. I've set up the La Fonera to connect to the RT-N16 as a wireless bridge, and is repeating my Wifi signal, as well as acting as a remote network port. All of these functions work perfectly, however there's one small issue I've come across and I can't figure out what's wrong.

    Any device, wired or wireless, that is connected to my main RT-N16 (acting as the Gateway+AP) cannot ping or access the web interface of the La Fonera running Gargoyle. However, if I connect to the repeated SSID or the physical network port of the La Fonera, I can access it, and everything works as it should. I CAN access the main RT-N16 no matter where I'm connected. Both the RT-N16 and the La Fonera are on the same subnet, and (RT-N16) and (La Fonera).

    I'm not sure what's going on. Any ideas?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice