1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can't goto modem admin page linked to my WRT54G

Discussion in 'Cisco/Linksys Wireless Routers' started by Camouflage112358, Aug 24, 2005.

  1. Hi,
    Been struggling with this problem for a few days - any help is welcome!

    Problems: I cannot access the admin page of my modem (Linksys - ADSL2MUE).

    Setup: WRT54G is wired to my PC (DHCP active, fixed ip= and the modem, ADSL2MUE is wired to the WRT54G (DHCP not active, fixed ip I would like to access the admin page of the modem by typing in the browser like I can access the admin page of the router ( But this doesn't work.

    I have to tell you I'm not the great router/modem expert I would like to be :(

    Am I missing something - settings, ...????

    Thanks in advance

  2. howardp6

    howardp6 Network Guru Member

    You are on a different subnet and that may be causing you a problem. The third node of the IP Address is different and possibly the mask is different. Depending on the IP Addresses the DHCP server is issuing addresses you should have had the local address of the WRT54G set at local address of 192.168.1.X where X has a value that is not 1, but outside the range of the addresses your DHCP server is issuing addresses. The subnet mask must be the same of

Share This Page