1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

change VPI VCI on wrt54g

Discussion in 'Cisco/Linksys Wireless Routers' started by jolt1987, Aug 10, 2006.

  1. jolt1987

    jolt1987 LI Guru Member

    Hi!
    I need to change VPI to 8 and VCI to 35. Which firmware is able to change those settings?l
     
  2. Toxic

    Toxic Administrator Staff Member

    afaik these settings are for ADSL modems. the WRT54G is not an ADSL modem. the only way you can change these settings is on the DSL modem, not the router.
     
  3. jolt1987

    jolt1987 LI Guru Member

    Hmm,i read something about changing that on the router. My provider gave me a dsl modem and it works fine when i just connect my computer to the modem. but it does not work when i connect the router to the modem,how come and how to make it work?
     
  4. Toxic

    Toxic Administrator Staff Member

    you need to setup the router to connect to the ADSL modem but you dont setup any VC settings. most are PPPoE settings. your provider sounds like he doesn't know was he was talking about.

    What ISP are you with?
     
  5. jolt1987

    jolt1987 LI Guru Member

    Hi!
    My ISP is NetCologne (I'm from Germany)
     
  6. jolt1987

    jolt1987 LI Guru Member

    I just read that the router has to be able to do IP with the WAN function and not only PPPoE,whatever that means...
     

Share This Page