1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Check wheter ND is installed or not

Discussion in 'Tomato Firmware' started by F157, Apr 22, 2009.

  1. F157

    F157 LI Guru Member

    Hey there,

    sorry for this stupid question, but is there a way to check if on a router there's the ND version installed or the standard version?
    I installed 1.23 some time ago, but I'm not sure anymore if it was ND or not.

    Does the ND version read "ND" somewhere?

    Thanks :)
     
  2. ringer004

    ringer004 LI Guru Member

    Look at the SYSLOG via the web interface

    Look at the SYSLOG for the following - this is the ND version:

    eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.25.0
    eth1: Broadcom BCM4320 802.11 Wireless Controller 4.130.19.0

    If memory serves me, the standard version is 3.x.y.z
     
  3. SgtPepperKSU

    SgtPepperKSU Network Guru Member

    If the syslog has already wrapped, you can get the same information by ssh/telnet into router and running
    Code:
    wl ver
     
  4. F157

    F157 LI Guru Member

    great, thanks to both of you :)
     
  5. landa

    landa LI Guru Member

    Non ND apear just like this:

    # wl ver
    wl: 3.90 RC37.0
    wl0: Feb 24 2005 20:22:09 version 3.90.38.0
     

Share This Page